Numéro |
J. Phys. France
Volume 51, Numéro 6, mars 1990
|
|
---|---|---|
Page(s) | 495 - 502 | |
DOI | https://doi.org/10.1051/jphys:01990005106049500 |
DOI: 10.1051/jphys:01990005106049500
Stretching of a polymer by an attractive wall
A. Johner1, E. Bouchaud2 et M. Daoud31 I.C.S.-C.R.M., 6 rue Boussingault, 67083 Strasbourg Cedex, France
2 O.N.E.R.A., B.P. 72,92322 Chatillon Cedex, France
3 Laboratoire Léon Brillouin, C.E.N. Saclay, 91191 Gif-sur-Yvette Cedex, France
Abstract
Using scaling arguments, we generalize to the excluded volume case an exact calculation that was made in a mean field calculation for the configuration of a polymer chain with one end fixed at a distance z from an adsorbing plane. In addition to the characteristic width of the adsorbed chain, there is a second distance that was ignored so far in subsequent discussions. This is the capture distance Z0 when the polymer starts being attracted by the surface: for larger distances the chain does not feel the surface. For smaller distances, if one end of the chain is fixed, a constant force has to be applied to keep it fixed and the polymer adopts a stretched configuration. We find Z0 ˜ Nδ2/3, where N is the length of the chain and δ the energy gain per monomer on the surface. We proceed by looking at the relaxation of such elongated chain when the constraint of fixed end is released. In this process, the chain relaxes the applied force by being sucked onto the surface. We find for the characteristic time for this process T ˜ N 2δ1/3. This may be relevant for extracting a chain from an adsorbed state. all our approach is based on Pincus' theory for a stretched polymer.
Résumé
En utilisant des arguments d'échelle, nous généralisons au cas de polymères à volume exclu un récent calcul exact de champ moyen des configurations d'une chaîne dont une extrémité est fixée à une distance z d'un plan adsorbant. En plus de l'épaisseur caractéristique du polymère adsorbé, il existe une seconde longueur qui a été ignorée dans les discussions récentes. Elle correspond à une distance de capture Z0 à partir de laquelle la chaîne commence à être attirée par la surface : pour des distances plus grandes, le polymère ne sent pas la surface. Pour des distances plus petites, on doit appliquer une force constante à l'extrémité pour la maintenir fixe, et la chaîne adopte une configuration étirée. Nous trouvons Z0 ˜ Nδ2/3, où N est la longueur de la chaîne et 6 le gain d'énergie par monomère sur la surface. Nous étudions également la relaxation d'une telle chaîne étirée lorsque la contrainte sur l'extrémité fixe est supprimée. Elle relaxe par un mouvement de succion par la surface. Nous trouvons un temps caractéristique T ˜ N2δ1/3 pour ce dernier processus. Ceci peut être interessant pour l'arrachement d'une chaîne adsorbée. Notre approche se fonde sur celle de Pincus pour une chaîne étirée.
6803F - Evaporation and condensation.
Key words
adsorption -- polymers